Pulse Jet Bag Dust Collector for Boiler
Pulse Jet Bag Dust Collector for Boiler
Introduction
Boiler bag dust collector is a kind of units combination dust removal machine, featured as large gas volume treatment, high filtering speed,99% dust collection efficiency, reliable operation.Working Principle
The dusty air is sucked in ash bucket of each chamber by fan, under the action of diversion system, the large particles will be separated from the gas and directly drop into ash bucket, while the other dust along with the gas will sucked into middle chamber--filtering area to finish filtration process, then the clean gas through the filter bags, upper chamber, poppet valve, discharged out by outlet. With this filtration process time and time again, the dust on surface of filter bags is accumulated too much to influence the collection efficiency, the PLC will control the de-dusting device, to open the pulse valves to blow off the dust on bags'surface into ash bucket,then unloaded by rotary valve. This type dust filter has bypass flue duct,when the boiler begins to work, open this bypass duct to avoid the filter bags burning accident.Our Projects
10 ton steam boiler and 4 ton steam boiler (3 sets)gas volume: 10 ton - 32000 m3/h 4 ton - 15000 m3/h
gas temperature: <=180 degrees
SO2 emission concentration < 200 mg/nm3
collection efficiency > 99.9%
fume emission concentration<50mg/nm3
ringelman emittance <1
If you want to know more details and consult technical details, please contact us freely as follows:
jenny yuan
whatsapp: +86 13834502705
email: jsyg01@outlook.com
skype: jenny-yuan09
website: http://www.dustcollector.com.cn/
评论
发表评论