Baghouse/Dust Collector/Filter Bags/Filter Cages

www.dustcollector.com.cn

The cause of glass fiber breakage is various : bad workmanship,improper use, unreasonable design of dust collector , incorrect installation, also caused by improper selection of filter bags. We can sum up roughly the following several factors: 1, due to the condensed water or acid gas which lead to corrosion 2, because of bad filtering effect, the dust collected on the filter bag agglomerate 3, due to the high temperature burn 4, improper installation, cause the filter bag or loose or tight 5, wind speed selection is not reasonable or filtering load is too big 6, collisions with neighboring filter bag, frictional 7, in the installation, repair, replacement, inspection, damaged by tools or human body. 8, because of improper adjustment for the tension spring 9, clear ash parameter design is not reasonable, causing the system resistance is too high, it is also one of the reasons of stripping fiber damage. To sum up, the cause of the bag damaged is: high temperature burnin...

Pulse Jet Bag Dust Collector for Boiler Introduction Boiler bag dust collector is a kind of units combination dust removal machine, featured as large gas volume treatment, high filtering speed,99% dust collection efficiency, reliable operation. Working Principle The dusty air is sucked in ash bucket of each chamber by fan, under the action of diversion system, the large particles will be separated from the gas and directly drop into ash bucket, while the other dust along with the gas will sucked into middle chamber--filtering area to finish filtration process, then the clean gas through the filter bags, upper chamber, poppet valve, discharged out by outlet. With this filtration process time and time again, the dust on surface of filter bags is accumulated too much to influence the collection efficiency, the PLC will control the de-dusting device, to open the pulse valves to blow off the dust on bags'surface into ash bucket,then unloaded by rotary valve. This type dust ...

First, Overview Flue gas desulfurization equipment can be resource-activated coke dry desulfurization technology is based on the principle of physical - chemical adsorption of sulfur resources recoverable dry desulfurization process, the desulfurization principle is in the range of 120-160 ℃, active coke adsorption flue gas SO2, H2O and O2, produced under the action of active coke sulfuric acid, stored in the active coke microporous, the adsorption of active coke heated to about 400 ℃, adsorption of activated coke in the porous sulfuric acid and active coke in the reaction of carbon, Release of high concentrations of SO2 (concentration of 20% -30%) and regeneration, active coke recycling, the release of high concentrations of SO2 gas using mature chemical technology, can produce a variety of sulfur-like commodity-grade products such as sulfuric acid, sulfur and Liquid SO2 and so on. SO2 into sulfuric acid adsorption in the active coke pores, while the active coke adsorption la...